The World’s Smallest Dolby Atmos Sound System
Lightweight and minimalist, designed for the new generation.
A true 7.1.4 auditory elevation.
Whether in a compact personal studio or a 350 sq ft living room, these two stands unlock genuine height channels, creating a highly immersive spherical sound field.
Different channels, same emotion.
Dolby Atmos delivers ultimate immersion — even 2-channel sounds pure and captivating.
Sing and be immersed.
With Karaoke mode, every performance feels like your own stage.
No setup required — enjoy immersive sound the moment you power on.
- ①～⑫: Standard Vevaldi 7.1.4 speaker layout
- LW & RW: Left wide and right wide speakers
- LTM & RTM: Left top middle and right top middle overhead speakers
- 2.SW: Active subwoofer (connect dual active subwoofers via a 3.5mm-to-RCA Y-splitter cable)
Main Unit Connection Diagram:
- ①～⑫: Standard Vevaldi 7.1.4 speaker layout
- LW & RW: Passive subwoofers
- LTM & RTM: Left top middle and right top middle overhead speakers
- 2.SW: Active subwoofer (connect dual active subwoofers via a 3.5mm-to-RCA Y-splitter cable)
Main Unit Connection Diagram:
- The factory default setting is 9.1.6 mode.
- On the remote control, press and hold "Display/Mode" button until an asterisk “ * ” appears below the speaker layout shown on the OLED display. This indicates the system has switched to 7.3.6 mode (as shown in the video below).
- To switch back to 9.1.6 mode, simply press and hold "Display/Mode" button again.
3.5mm to RCA Y-Splitter Cable
Purpose:
Allows you to connect two active subwoofers to the Vevaldi main unit.
Usage:
Plug the 3.5mm connector into the 2.SW port on the Vevaldi main unit, and connect the RCA outputs to your two active subwoofers.
Amplifier
PSU + Power cord 2m
IR Remote
V232 Bluetooth controller
Anti-slip pad
Speaker setup guide card
Packaging Dimensions:
30.5 x 20 x 15.5 cm
Speaker x11
Table Stand x3
5m Audio Cable x3
1.8m Audio Cable x4
2.5m Audio Cable x4
5m 4-ch Bundled Cable x1
8m 4-ch Bundled Cable x1
Packaging Dimensions:
57 x 20.7 x 52.4 cm
Subwoofer x1
5m Audio Cable x1
Anti-slip pad x4
Packaging Dimensions:
26.3 x 25.3 x 37.5 cm
Surround Stand x2
Round Wood Table x1
Packaging Dimensions:
115 x 16.5 x 73.8 cm
Length: 0.4 m + 0.2 m + 0.4 m
Purpose:
If you already own a high-quality pair of stereo speakers for the left and right channels, you can use this cable to merge Vevaldi’s 3 original speakers (used for Left, Center, and Right channels) into a center speaker to complement your setup.
Usage:
Connect the female jack to Vevaldi’s no. 3 cable, and the male plugs to the 3 speakers.
Length: 0.15 m
Purpose:
If you plan to connect your own speakers to the Vevaldi AMP, use this cable to connect them.
Usage:
Connect the female jack to Vevaldi’s audio cable, and the banana male plugs to your speakers.
Length: 0.6 m
Purpose:
If you plan to connect your own speakers to the Vevaldi AMP but your speaker wiring is in-wall, in-ceiling or non-removable, use this cable to link your speaker terminals to the Vevaldi AMP.
Usage:
Connect the banana female jacks to your speaker wiring, and the male plug to the Vevaldi AMP.
Immersive spatial sound for everyone. Hear and feel any sound as authored.
© 2026 Vevaldi. All rights reserved.